Car hydraulics - American Hydraulics

- 20.31

Bosch Rexroth Opens Its Largest American Hydraulics Facility ...
photo src: www.automationworld.com

Car hydraulics are installed into an automobile that allows for an adjustment in height of the vehicle. These suspensions are placed often in a lowrider, a vehicle modified so that its ground clearance is less than its original design, to give extra leverage when encountering harsh road conditions. These modifications done to the automobile can enable the body and wheels of the car to be electronically lifted off the ground, while being controlled by remote. Many times the amount of hydraulics kit being used and the differences in automobile has an effect on the extent of the change to the amount of height the car gains. With the added kit, this enables these automobiles to jump and hop, upwards of six feet from off the ground. This effect, these hydraulics enables a car to do has led to car jumping contests nationwide, judged on how high the automobile is able bounce up and down.


American Hydraulic Services
photo src: americanhydraulic.net


Maps, Directions, and Place Reviews



Origin

Lowrider automobiles originated in Mexican American communities in Southern California. Car hydraulics were originally very expensive to have installed, and were only used to be shown at car shows. However, after WWII, more Mexican Americans were able to afford older, less expensive, automobiles. In the early 1960s, these automobiles, many times classics from the 1950s, began to be modified and customized to riding low to the ground. This however, was not favored by many police in Southern California and owners of these cars were ticketed. This is the reason behind why car hydraulics were installed. This enabled these car drivers to adjust these cars to the original height when put in a compromising position. This then began to spiral into a trend that spread to African American communities, as well as White American communities, throughout Southern California and many other western states. Today, lowriders can be found anywhere, worldwide, however the greater percentage is in the Western States in the United States.


American Hydraulics Video



International

In 1979, Japan received a shipment of Low rider magazines, which shown on the cover was a lowered Chevy in front of Mount Fuji. This magazine, Orlie's Lowriding Magazine, was a profitable magazine that advertised lowriders and hydraulic kits for their consumers. Along with these magazines came mail-order forms to purchase automotive hydraulics kits. By the 1980s, these kits along with cars, made Japan Orlie's top purchaser.


Check Out the World American Hydraulics Training School - Midwest ...
photo src: www.midwesttruck.com


Interior

The original pumps, valves and cylinders used for the modifications to these cars were originally used for operations done for airplanes. Using these materials took a lot of engineering ability in order to get these cars back in working condition after being stripped. For many automobile owners, it was too expensive to have an auto shop install the hydraulics in their car for them. In the early 1960s, owners were left to do the mechanics for their own cars because the kits were not sold in stores until the later 1960s. These hydraulic kits were known as "trays" to many consumers. Many times, since these batteries, pumps and valves were made for such large aircraft originally, extra batteries were needed to assist in the hydraulics. This would run the batteries down more often than the original usage for these batteries so, it was necessary for the owners of these automobiles to charge the automobile's batteries more frequently. After using aircraft materials, liftgate trucks' materials were found to be more manageable on the car as well as the maintenance of the car.

These cylinders, two or more, are connected to one pipe that is filled with oil, the basic fluid used for a hydraulic system. The cylinders are used to compress enough pressure on the oil, fluid being supplied by the pump, to push the automobile up. The motion of car is defined by the amount of cylinder pumps installed in the vehicle. Depending on the amount and placement of the pumps, determines the range of motion the automobile has.


Popular Hydraulic Cylinder Size-Buy Cheap Hydraulic Cylinder Size ...
photo src: www.aliexpress.com


Car Hydraulics are many times shown and advertised in the media. In the 1970s, many movies shot in east Hollywood became known for their lowrider automobiles with fancy hydraulics. Movies such as Up in Smoke and Chong's Classic were some of the few films featuring lowriders. Even in more recent films and media, these automobiles are being displayed. Demonstrated in 1998's Wrongfully Accused, Leslie Nielson's character, Ryan Harrison, steals a car that has installed hydraulics. The movie display's the bounce given by certain hydraulic systems that are equipped in specific cars. In 2004, Snoop Dogg's Music Video, "Drop It Like It's Hot", featuring Pharrell, a 2009 Rolls Royce Phantom is showing its installation hydraulics by tilting on the two left wheels, behind Snoop Dogg rapping.

Source of the article : Wikipedia



EmoticonEmoticon

 

Start typing and press Enter to search